Aluminum

Aluminum, like stainless steel, is corrosion resistant. It is, however, much lighter and softer than stainless and carbon steel. To prevent the dull appearance that results from the oxidation of the outer layer, aluminum can be either clear or color anodized after perforating. Unlike paint or powder coating, anodize film is built from the aluminum itself and takes on a translucent appearance. The alloys listed below are categorized into two types: non-heat-treatable and heat-treatable.

Commonly Perforated Aluminum Types

Grade	Description
1100 (Non-Heat-Treatable Alloys)	This commercially pure, low-strength alloy has excellent corrosion resistance and satisfactory anodizing and coating finishes. It is unmatched by any other commercial aluminum alloy in workability.
3003 (Non-Heat-Treatable Alloys)	The most widely used general-purpose alloy because of its good corrosion resistance, moderate strength, formability, and weldability. This alloy may show some slight discoloration when anodized, but reacts well to other coating finishes.
5005 (Non-Heat-Treatable Alloys)	Comparable to 3003 in strength and formability, this alloy has superior finishing characteristics, making it much better for anodizing. Excellent corrosion resistance and weldability, but rates below 1100 and 3003 for machining.
5052 (Non-Heat-Treatable Alloys)	A versatile high-strength alloy with good forming characteristics and excellent corrosion resistance. Although easily welded, it is not recommended for brazing and soldering applications. Anodized coatings may take on a yellowish tint if applied too thick.
2024 (Heat-Treatable Alloys)	An age hardening, high-strength alloy with nearly twice the strength of 5052 and fair corrosion resistance. Alclad 2024 provides improved corrosion resistance. Anodized coatings may take on a yellowish tint if applied too thick.
6061 (Heat-Treatable Alloys)	A high-strength alloy that has very good corrosion-resistant, finishing, and welding characteristics. Anodized coatings may take on a yellowish tint if applied too thick.
7075 (Heat-Treatable Alloys)	Developed for aircraft applications, this is one of the strongest, commercially available alloys. It has fair corrosion resistance and machinability. Alclad 7075 provides improved corrosion resistance. Anodized coatings may take on a yellowish tint if applied too thick.

NOTE: If an aluminum type is not specified, Diamond Manufacturing Company will use 3003 which is the most commonly perforated alloy for pricing and production.

Aluminum				Lbs. Per Square Foot
Gauge	Mean of Gauge	Min. of Gauge	Max. of Gauge	1100	3003	5005	5052	2024	6061	7075
1	.249	.238	.260	3.52	3.56	3.52	3.49	3.60	3.53	3.623
4	.190	.181	.199	2.69	2.71	2.69	2.65	2.77	2.69	2.763
6	.160	.152	.168	2.27	2.28	2.27	2.23	2.32	2.25	2.327
8	.125	.120	.130	1.76	1.78	1.76	1.75	1.82	1.76	1.818
10	.100	.095	.105	1.41	1.43	1.41	1.40	1.45	1.41	1.454
11	.090	.086	.094	1.27	1.28	1.27	1.26	1.31	1.27	1.309
12	.080	.076	.084	1.13	1.14	1.13	1.12	1.16	1.13	1.164
14	.063	.059	.067	.889	.898	.889	.880	.916	.889	.916
16	.050	.046	.054	.706	.713	.706	.698	.727	.706	.727
18	.040	.037	.043	.564	.570	.564	.559	.582	.564	.582
20	.032	.0295	.0345	.452	.456	.452	.447	.466	.452	.465
22	.025	.0225	.0275	.353	.356	.353	.349	.364	.353	.364
24	.020	.0175	.0225	.282	.285	.282	.279	.291	.282	.291
26	.016	.014	.018	.226	.228	.226	___	.232	___	___
28	.012	.010	.014	.169	___	.169	___	___	___	___